T-250 Speed Servo

(3 reviews) Write a Review

Pick your line and pass the competition with the Tekin T-250 Servo. Designed to give you the industry’s highest per degree resolution steering and plenty of speed to keep that chassis where you want it. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you in control. Fine-tune your setup with and extensive set of adjustments via Tekin’s HotWire PC Interface.


Specifically Designed for 1/10 and 1/8 Scale Applications

Included Aluminum 20mm Crowbar™ HD Clamping Servo Arm

Full Aluminum Servo Housing

Precision Cut Full Metal Gears

ABEC5 Ball Bearings

Digital Magnetic Position Encoder

High Voltage Capable

High Torque Coreless Motor

25T Output Spline

Programmable via HotWire™ Interface

Overload Protection Technology

Thermal Protection Circuitry

Low Voltage Alarm*

Quiet, Efficient, Cool Operation

HDAC: High Density Copper PCB's

*requires HotWire sold separately


Torque: 8.4 - 7.4 - 6.0V

310 - 282 - 245 oz/in

22.3 - 20.3 - 17.6 kg/cm

Dynamic Torque: 8.4 - 7.4 - 6.0V

449 - 415 - 325 oz/in

32.4 - 29.9 - 23.4 kg/cm

Speed: 8.4 - 7.4 - 6.0V

0.07 - 0.08 - 0.09sec/60*

Input Voltage: 4.8V-8.4V

Gear Set: Full Metal

Dimensions: 1.57 x 0.79 x 1.57in / 40 x 20 x 40mm

Mounting Height (Base to Mount Tabs): 1.10in / 28.4mm

Weight: 2.53oz / 72g?

3 Reviews Hide Reviews Show Reviews

  • 5

    Posted by Brian daugherty on Aug 8th 2022

    Best servers on the market by far

  • 5
    8th scale go to servo

    Posted by Dave on Mar 16th 2022

    Having tried almost everything on the market, these have quickly become my favorite for 8th scale and 4wd SC. The resolution once programmed is second to none, and the convenience of software end points and centering is amazing.

  • 5
    Perfect combination of speed and torque for 1/8 nitro!

    Posted by Jeremy Jones on Jul 5th 2020

    I selected this as the throttle/brake servo for a new truggy kit. I has the perfect combination of speed and torque for any amount of stopping power you need, yet its extremely precise. Fit and finish were phenomenal! Install was straight forward and everything lined up perfectly. 1 nitro engine break in, 2 race days with 2 wins on it, and the gears are perfectly tight with no annoying electronic buzzing sound like other manufacturers. I am super thrilled with this servo. If you are running 1/8 nitro and need a throttle/ brake servo.... Stop looking and get the T-250!